retrofit

Switch to High-Efficiency Plumbing Fixtures to Save Water, Energy, and Money

Reducing your water use has multiple benefits. In addition to helping to conserve and protect your community’s vital water supplies, saving water also helps you save money and energy.

According to the U.S. EPA, if all U.S. households installed water-efficient fixtures and appliances, the country would save more than 3 trillion gallons of water and more than $18 billion dollars per year.

Conserving water also conserves energy, because energy is used to treat, deliver, and heat water. If one out of every 100 American homes were retrofitted with water-efficient fixtures, that would save about 100 million kWh of electricity per year—avoiding 80,000 tons of greenhouse gas emissions: equivalent to removing nearly 15,000 automobiles from the road for one year. For additional information on the benefits of saving water, see this EPA webpage.

Low-flow fixtures have been on the market for a while. These days, there are also many ultra-low-flow fixtures that conserve even more water without compromising performance. The EPA’s WaterSense program labels ultra-low-flow, highly water-efficient plumbing fixtures that have been independently tested and certified to meet efficiency and performance standards. In addition to being approximately 20% more water-efficient than average products, WaterSense labeled products have been verified to perform “as well or better than their less efficient counterparts.”

To select the most water-efficient plumbing fixtures, you should look for products with certain flow thresholds. The following sections outline the thresholds to be aware of when selecting ultra-low water-use toilets, showerheads, and faucets:

HIGH-EFFICIENCY, WATER-SAVING TOILETS

Toilets are often the source of the most water use (and water wasting) within a home, accounting for nearly 30 percent of an average home’s indoor water consumption. If you have a toilet(s) that uses more than 1.6 gallons of water per flush (gpf)—as do almost all toilets installed before 1994—replace it with one of the following:

  • High-efficiency (or ultra-low-flush) toilet model that uses no more than 1.3 gpf (the current EPA WaterSense standard, as of 2010); or better yet, a…
  • Dual-flush toilet, which has a lower-flush button for liquid waste and a higher-flush button for solid waste; this type of toilet is common in Australia and Europe and is becoming increasingly popular in the U.S. (Dual-flush conversion/retrofit kits are also available to convert a regular toilet into a dual-flush.) Or even better, consider installing a…
  • Composting toilet, which uses little to no water for flushing.

In California, new legislation has mandated that all new toilets sold or installed in the state after 2014 must be high-efficiency toilets. At some point, federal standards might also be raised to this standard.

For commercial/office-building bathrooms, install ultra-low-flush (ULF) urinals in lieu of regular urinals.

[Click for MORE…]

Share

August 25, 2010
[Click here to comment]

Low-Cost, High-Payoff Green Home Improvements and Retrofits

Homeowners (and renters) are increasingly interested in making green home improvements, and they’re particularly interested in knowing which improvements have a low cost and a clear payback—i.e., a decent Return on Investment, or ROI. Here are some commonly agreed upon suggestions for relatively easy and economical projects that reap surefire savings (in energy, water, and dollars):

  1. Switch to LED and/or compact fluorescent (CFL) light bulbs. (Note: When buying CFLs, look for low-mercury products. Also, because CFLs contain mercury, they cannot be thrown in the trash; they must be recycled by a hazardous waste facility. Some stores, such as Home Depot, collect used CFLs. You can find other places near you that take used CFLs on Earth911.com.)
  2. Switch to WaterSense plumbing fixtures (e.g., dual-flush or other high-efficiency toilets, and ultra-low-flow faucets and showerheads). [MORE INFO here.]
  3. Switch to Energy Star appliances and electronic equipment when it’s time to replace old units. Install an Energy Star ceiling fan(s), to reduce or eliminate your use of air conditioning.
  4. Insulate your hot water pipes and water heater; and add insulation to your attic (and/or walls and basement).
  5. Have a home energy audit done to check for air leaks and identify other inefficiencies; a home performance contractor should then make the needed improvements. More and more companies are springing up to offer these services. (One of the first companies on the scene was Recurve, formerly called Sustainable Spaces.) You can search here for a contractor near you who has been accredited by the Building Performance Institute. If you live in California, check out the information provided by Energy Upgrade California.

For other ideas and helpful cost/benefit assessments, check out this new book: Green Sense for the Home: Rating the Real Payoff from 50 Green Home Projects, by Eric Corey Freed and Kevin Daum (Taunton Press, April 2010). Here’s the publisher’s description of the book: “When does a green home project make financial sense? The authors of this book provide the answer to this and other questions relating to the cost (and relative value) of environmentally friendly home improvements. They evaluate a wide array of projects, including insulating pipes, weatherizing doors and windows, composting and recycling trash, installing a solar hot water heater, installing green countertops, upgrading appliances, building with reclaimed materials, and installing radiant heat.”

Other recent books include Green Home Improvement: 65 Projects That Will Cut Utility Bills, Protect Your Health & Help the Environment by Daniel Chiras, PhD (RS Means) and This Green House: Home Improvements for the Eco-Smart, the Thrifty, and the Do-It-Yourselfer by Joshua Piven (Abrams).

A number of federal, state, and local tax credits, rebates, and other financial incentives are available for installing energy-efficient equipment or renewable energy (e.g., solar) technologies at your residence.

For additional information and tips on green home improvements and retrofits, these are some useful online articles and websites, most of which feature lists of cost-effective improvements:

If you’d like assistance with choosing and implementing your green home improvements or remodeling strategies, I am a green advisor who can provide this type of assistance through email consultations (or phone or in-person consultations). Click here for more info.

Share

May 6, 2010
3 comments

Green Tax Credits, Rebates, and Other Financial Incentives

GreenDollarSignThe following are key online resources for information on federal, state, and local environmental tax credits, rebates, and other financial incentives. Most of the incentives that are available are for installing energy-efficient equipment or renewable energy (e.g., solar) technologies.

FEDERAL

These are good directories of federal income tax credits, grants, other incentives for energy-efficient products—for consumers, as well as businesses, builders, and manufacturers:

Click here for a clear summary of the main tax credits currently available: essentially 30% of various energy-efficiency improvements (up to $1,500) and 30% of the cost of solar energy installations. For info on federal grants (to organizations and agencies), go to Grants.gov.

STATE AND LOCAL

Check out the Database of State Incentives for Renewables and Efficiency for a compendium of options, organized by state. Also check with your municipality (city and county governments) and local utility companies. Many offer their own green rebates and incentives. And this is a great summary of energy-efficiency grants and funds provided to state and local agencies by the 2009 economic stimulus/recovery bill (ARRA).

CALIFORNIA

For those of you who are in California, there are numerous entities offering green rebates and other incentives. Take a look at these resources:

If you know of other useful directories or resources related to green financial incentives, or if you have made use of energy tax credits or other green incentives, please share your experiences or suggestions by leaving a comment below.

NEW (added 1/19/10): Also check out the directory of energy rebates and tax credits at EnergySavvy.com. Enter your zip code and the site will give you a list of applicable state, local, and federal incentives.

Share

November 16, 2009
[Click here to comment]

ENERGY STAR Products for Homes and Businesses

Image by Matt FarrarENERGY STAR is an energy efficiency rating program developed by the U.S. Department of Energy and the U.S. Environmental Protection Agency. Most people are familiar with ENERGY STAR labeled home appliances and light bulbs, but many people may not be aware that the label is applied to more than 60 different types of products (for residential use as well as commercial building use), including heating and cooling equipment, roofs, and many types of electronics. (Note: Heating and cooling are the largest sources of energy consumption in homes; they account for almost half of a typical home’s energy consumption and energy costs.)

Energy StarSpecific examples of products for which you can find ENERGY STAR qualified models include: air conditioners (central or room), ceiling fans, exhaust/ventilation fans, furnaces, boilers, thermostats, water heaters, refrigerators and freezers, dishwashers, clothes washers, insulation, windows, skylights, roofs, doors, light fixtures and bulbs, as well as TVs, DVD players, phones, computers, monitors, printers, copiers, etc.

To find out which brands and models of a particular product have earned the ENERGY STAR label, or to compare the levels of efficiency among different models, go to the ENERGY STAR Qualified Products website. Also, check with your utility company to see if they offer rebates for purchasing energy efficient equipment or appliances; many utilities do.

[Click for MORE…]

Share

March 28, 2009
[Click here to comment]